Otvaranje porta pomocu DOS-a?

[jakob88]

Kako otvoriti port u Dos-u kada je firewall iskljucen...
znaci komanda netsh firewall add portoprning ne pomaze...
ima li neki drugi nacin???

[VojaM]

jakob88 kaže:

Kako otvoriti port u Dos-u kada je firewall iskljucen...
znaci komanda netsh firewall add portoprning ne pomaze...
ima li neki drugi nacin???

add portopening
      [ protocol = ] TCP|UDP|ALL
      [ port = ] 1-65535
      [ name = ] name
      [ [ mode = ] ENABLE|DISABLE
        [ scope = ] ALL|SUBNET|CUSTOM
        [ addresses = ] addresses
        [ profile = ] CURRENT|DOMAIN|STANDARD|ALL
        [ interface = ] name ]

  Adds firewall port configuration.

  Parameters:

  protocol - Port protocol.
      TCP - Transmission Control Protocol (TCP).
      UDP - User Datagram Protocol (UDP).
      ALL - All protocols.

  port - Port number.

  name - Port name.

  mode - Port mode (optional).
      ENABLE  - Allow through firewall (default).
      DISABLE - Do not allow through firewall.

  scope - Port scope (optional).
      ALL    - Allow all traffic through firewall (default).
      SUBNET - Allow only local network (subnet) traffic through
      CUSTOM - Allow only specified traffic through firewall.

  addresses - Custom scope addresses (optional).

  profile - Configuration profile (optional).
      CURRENT  - Current profile (default).
      DOMAIN   - Domain profile.
      STANDARD - Standard profile.
      ALL      - All profiles.

  interface - Interface name (optional).

  Remarks: 'profile' and 'interface' may not be specified togethe
           'scope' and 'interface' may not be specified together.
           'scope' must be 'CUSTOM' to specify 'addresses'.

  Examples:

      add portopening TCP 80 MyWebPort

      add portopening UDP 500 IKE ENABLE ALL

      add portopening ALL 53 DNS ENABLE CUSTOM 177.60.0.1,172.16.0.0/16,10.0.0.0/255.0.0.0,LocalSubnet

      add portopening protocol = TCP port = 80 name = MyWebPort

      add portopening protocol = UDP port = 500 name = IKE mode = ALL

      add portopening protocol = ALL port = 53 name = DNS mode = scope = CUSTOM addresses = 157.60.0.1,172.16.0.0/16,10.0.0.0/255.0.0.0,LocalSubnet

Inače, moguće da to radi samo kad je firewall uključen.

[jakob88]

Ne pomaze,
add portopening radi samo uz netsh firewall...
Hvala u svakom slucaju...aaa