Sabayon Linux: Wireless i DVD, CD Rom problemi

[Aksic Srdjan]

Ok, instalirao sam gore pomenuti Sabayon Linux, i mnogo mi se dopada, i već ima nekih problema, mada su upitanju podešavanja, bilo kako bilo da krenemo:

Sabayon Linux, primetim ja da nema CD/DVD Roma, ok, ja napravim to na desni klik i device i dvd/cd rom, međutim, evo šta se dešava kad pokušam da mu pristupim:



Idemo dalje, kad sam video da se u meniju nalazi isti wireless untility kao što koristim u windwsu RaLink, ja sav srećan posegnem za njim (mislići da ću lako da podesim sve kao u windowsu):



I kad on meni kaže da nemam root privilegije, ja izadjem i udjem kao root, kad on meni:



Svako ko može da mi pomogne, neka obavezno to učini, HELP! HELP! HELP!

[Covenant]

Nisam siguran,ali mislim da ce ti za wireless karticu biti potreban ndiswrapper

http://ndiswrapper.sourceforge.net/

Morace to neki drugi da ti objasni,nisam verziran za to,a sto se tice cdrom-a-pa zar ne bi trebao u Sabayon-u automatski da mount-uje bez da pravis onu ikonicu

[Aksic Srdjan]

Hvala za link, probaću to.


Ne, nema te ikonice za dvd/cd romove nigde, čak što više po nekad pokazuje windows particije a po nekad samo linux particiju, što je čudno ali i nebitno.

U međuvremenu sam primetio da nema zvuka, kad podignem system bez instalacije na hdd (liveCD) zvuk radi, a kad instaliram system na hdd - nema ga!

[Aksic Srdjan]

Tražio sam svuda po opcijama da nekako enablujem zvuk, još ni traga od zvuka


EDIT: Problem sa zvukom više ne postoji! Bilo je do nekog podešavanja.

[Aksic Srdjan]

Jel može neko da mi pojasni ovo:

The instructions below explain how to install ndiswrapper. This is
rather short version; more details about installation,
troubleshooting, FAQ etc. can be found in the Wiki at

http://ndiswrapper.sourceforge.net/wiki

Prerequisites
=============

You need a recent kernel, at least 2.6.6 or 2.4.26, with header files
for the kernel. Make sure there is a link to the kernel source from
the modules directory. The command

ls /lib/modules/`uname -r`/build

should have at least 'include' directory and '.config' file.

Downloading
===========

Download the latest version of the ndiswrapper sources from here and
extract it with the command

tar zxvf ndiswrapper-version.tar.gz

This will create ndiswrapper-version directory. Change to that
directory and run

make uninstall
make

Login as root and run
make install

Install Windows driver
======================

If this is the first time you install ndiswrapper, you need to install
Windows driver for Windows XP (in some cases Windows NT or Windows
2000 may also work). First, get a Windows driver that is known to
work. See http://ndiswrapper.sourceforge.net/wiki/List for status
about the device for which you are installing Windows driver. For
this, you need to identify device ID with

lspci -n

if it is PCI device or

lsusb

if it is USB device.

Then lookup in that List for the device ID and if a driver is known to
work, get that driver. Occassionally, Windows driver on the CD or your
Windows partition may work, but if it doesn't, don't complain - get a
known-to-work driver.

Many Windows drivers are distributed either as zipped files or cab
files. Zipped files, even if they are .exe files, can be extracted
with 'unzip' in Linux; cab files can be extracted with combination of
'cabextract' and 'unshield' programs.

Once the driver has been unpacked, locate .inf and .sys files. If
necessary, move these files so both .inf and .sys are in the same
directory. Some drivers also come with firmware files, such as
fwrad16.bin etc. These files also should be in the same
directory. Then install the Windows driver with

ndiswrapper -i driver.inf

This installs .inf file and required .sys and .bin files. Now, see if
installation of Windows driver is "valid" with

ndiswrapper -l

This should report

"driver present, hardware present"

for the driver installed and if that driver is for the device that is
already in the system. If device is not present, it should report

"driver present"

If not, the Windows driver has not been installed properly.

Now load ndiswrapper module with

modprobe ndiswrapper

If everything worked properly, this should initialize 'wlan0' wireless
device, which can be configured with wireless tools, such as
'iwconfig', 'wpa_supplicant' etc.

Prvo od mojih pitanaja bi bilo: u kojoj konzoli ja te komande kucam?

[bl00dz3r0]

ralink odlicno radi na linuxu bez emulacije (ndiswrapper).
Samo naravno treba podesiti / instalirati modul

[VojaM]

Aksic Srdjan kaže:

Prvo od mojih pitanaja bi bilo: u kojoj konzoli ja te komande kucam?

U kojoj god konzoli. Ili otvoriš terminal prozor, ili pozoveš neku od konzola sa Alt+Shit+F1 (F2, F3... izuzev one koja je rezervisana za vraćanje u grafičko okruženje, recimo F7). Možda je lakše u terminalskom prozoru.

Ali lepo ti reče čovek da ti to možda i nije potrebno. Proveri!

[GoranSTX]

drajveri za ralink cipove i kako se podesava na
http://rt2x00.serialmonkey.com/wiki/...itle=Main_Page

Inace, meni je rt2500 cip radio out-of-box.

[Covenant]

Aksic Srdjan kaže:

Prvo od mojih pitanaja bi bilo: u kojoj konzoli ja te komande kucam?

Kmenu-System-Konsole

[bl00dz3r0]

kucaj iwconfig pa vidi jel ti prepoznaje interfejs.

[Aksic Srdjan]

Hvala svima, već sam se bacio na ispitivanje predloga

[Aksic Srdjan]

Ovo dobijam kad ukucam w config, i ne znam šta znači to:



Sada idem da instaliram linux driver.

[Kerber]

Kucaš iwconfig

Par saveta: koristi TAB za autocomplete kad radiš u terminalu. Dakle ukucas iw pa TAB dok ti ne ponudi moguć izbor komandi. Za paste u terminalu koristi kombinaciju shift+insert.

[Aksic Srdjan]

Kerber kaže:

Kucaš iwconfig

Par saveta: koristi TAB za autocomplete kad radiš u terminalu. Dakle ukucas iw pa TAB dok ti ne ponudi moguć izbor komandi. Za paste u terminalu koristi kombinaciju shift+insert.

ahaaaaa evo sad ću

[Aksic Srdjan]

iwconfig kaže da je command not found

A onaj linux driver, sve piše nešto pfff u instrukcijama za instlaciju...

Installation instructions for the rt2x00 Modules

================================================== =============================
Minimal requirements:
====================

- Kernel
# Only 2.6.13 and higher kernels are supported.

- Wireless extensions
# Your kernel should be compiled with Wireless extensions V18 or higher.

- ieee80211 stack
# rt2x00 depends on the ieee80211 stack developed by the netdev team.
# The latest ieee80211 stack can be found in the ieee80211/ folder
# in the rt2x00 module source. This is updated from the netdev-2.6
# git repository on a frequent basis.

================================================== =============================
=======
Build Instructions:
====================

- $make
# Build rt2x00 & ieee80211 modules with default options.
- $make nodebug
# Build rt2x00 & ieee80211 module without debug capabilities.
- $make rt2x00-nodebug
# Build rt2x00 module without debug capabilities.
- $make ieee80211-debug
# Build ieee80211 module without debug capabilities.
- $make debug
# Build rt2x00 & ieee80211 modules with debug capabilities enabled.
- $make rt2x00-debug
# Build rt2x00 modules with debug capabilities enabled.
- $make ieee80211-debug
# Build ieee80211 modules with debug capabilities enabled.
- $make install
# Install the rt2x00 & ieee80211 modules.
- $make rt2x00-install
# Install the rt2x00 modules.
- $make ieee80211-install
# Install the ieee80211 modules.
- $make clean
# Cleans up all rt2x00 & ieee80211 files created at build time.
- $make rt2x00-clean
# Cleans up all rt2x00 files created at build time.
- $make ieee80211-clean
# Cleans up all ieee80211 files created at build time.

[Kerber]

Otpakuješ driver. Uđeš u dati direktorijum i ukucaš prvo

make

pa

make install

Moraš biti ulogovan kao superuser (root)

Nakon toga probaj

iwconfig

I za ovo moraš isto da budeš ulogovan kao root
Javi rezultate

[Aksic Srdjan]

Kerber kaže:

Otpakuješ driver. Uđeš u dati direktorijum i ukucaš prvo

make

U koji dati direktorijum? i kako uđem, jel preko konzole?

[Kerber]

Preko konzole
Verujem da si skinuo tar.gz fajl i da si ga snimio na primer u
/home/theclone/driver dir.
Odeš u terminal tj konzolu pa kucaš

cd /home/theclone/driver

pa zatim

tar -xzvf  imefajla.tar.gz

potom

cd imeraspakovanogpaketa

Pa onda make i make install
Vodi računa o malim i velikim slovima i uloguj se kao superuser.

[Aksic Srdjan]

Jeli? KAKO si znao da mi je profil (pored root-a) theclone???????

Ok, idem sad da uradim to...

EDIT/ ja sam ga raspakovao van konzole, nadam se da ce sve biti u redu.

[Kerber]

Kako sam znao ? Pa piše gore na onoj slici što si okačio.

Probaj ponovo iwconfig ali ovaj put se uloguj kao superuser (root) u konzoli (na onoj slici nisi ulogovan)
Kucaš u konzoli

su -

Pa pass i enter