USB Device Not Recognized Windows 7 Problem

[Johnny-24]

Pozz imam problem kada ubacim dzojstik u USB pise usb device not recognized, do juce je radio odlicno i u toku igranja PES-a je prestao da radi, ja sam spustio sliku i video tu gresku, ima li resenja za ovaj problem ili ne trazio sam po netu radio po uputstvima i nista opet isto. Dzojstik je Gigatech GX-105..

[cane.prebranac]

Jesi probao u drugom kompu? Ako i tamo ne radi onda je umreo.

[Lex987]

Ako radi u drugom kompu, probaj sledece:



1. Click Start and type Device Manager in Start Search.

2. Expand the Gamepad Device and right click the device and click Properties (Human Interface Devices)

3. Click Power Management Tab.

4. Put a check mark for “Allow this device to wake the computer” and uncheck the option “allow the computer to turn off the device to save power”.

5. Click OK.


1. Disconnect all other USB devices (except keyboard and/or mouse).
2. Completely remove your new controller.
3. Reboot computer, Windows gets weird when it runs long periods without a fresh start.
4. Disable anti-virus, temporarily.
5. Install your new controller by connecting directly to the computers USB port, don't connect thru a hub, hub may be bad.



Unplug your computer. Don’t just turn it off with the power button, you need to actually unplug the cable from the power supply for at least 1 minute. This often resets your USB hub on your motherboard.

[Johnny-24]

Uradio sve kako pise ovde ali opet nece, ici cu u subotu do ujke da ga testiram ako i tamo isto tako onda je on umro..

[Lex987]

Probaj jos ovo:

1) Click "START"
2) Right click on "Computer"
3) Click "Properties"
4) In left menu click on "Device Manager"

Note ( My joystick was an USB joystick , and most of them are USB )

5) Dropdown the "Human Interface Devices"
6) Yuo should see your device there
7) Right Click on your joystick device shown there and click "Update Driver Software ..."

Then you will have two options, first one is "Search automatically for update driver software" and second`one is "Browse My Computer For Driver Software"

8) Chose the second option "Browse My Computer For Driver Software"

Then you will see again two options , first one is "Search For Driver Software In This Location ( Browse )" and second`one is "Let Me Pick From A List Of device Drivers On My Computer"

9) Choose the second option "Let Me Pick From A List Of device Drivers On My Computer"

Note ( I dont know if you will see the same as me , but if you do you will fix your problem )

10) You will have few options ,i have right now two options , first option is "USB Input Device" and second option is "USB Device"

11) Click on "USB Input Device"

12) Now click "Next"

Then you Should see loading process bar with "Installing Driver Software" text.
If it will success you will see the message "Windows has successfully updated your driver software"

And your joystick should work!

[Johnny-24]

Nece ni ovo kad idem na ono Let Me Pick From A List Of device Drivers On My Computer i nastavim dalje on mi izbaci neku gresku Code 43..