|
Web dizajn Saveti u vezi dizajna sajtova |
|
Alatke vezane za temu | Vrste prikaza |
11.2.2009, 17:21 | #1 |
Novi član
Član od: 11.2.2009.
Poruke: 24
Zahvalnice: 2
Zahvaljeno 0 puta na 0 poruka
|
Ako bi neko mogao neko da mi pomogne..:))
E ovako..Uz skromno poznavanje dreamweaver-a prihvatim se ja posla da napravim jedan sajt.I skinem free template,prekrojim ga skroz po svom ukusu,sve fino linkujem i kod mene na laptopu sve izgledalo super.Medjutim kada sam sve pogledala u rezoluciji 1440 x 900,nista nije kako treba, sve pomereno( slike,tabela..) u desnu stranu i preklapa jedno drugo..A na markup validation service izbaci sledece greske:
1. Error Line 20, Column 17: there is no attribute "language". <script language="JavaScript" type="text/JavaScript"> ? You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead). This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information. How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash. 2. Error Line 70, Column 172: there is no attribute "align". ….png" width="332" height="148" align="absmiddle" /> </div> ? You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead). This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information. How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash. 3. Error Line 70, Column 185: required attribute "alt" not specified. …332" height="148" align="absmiddle" /> </div> ? The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element. Typical values for type are type="text/css" for <style> and type="text/javascript" for <script>. 4. Error Line 72, Column 21: document type does not allow element "li" here; missing one of "ul", "ol" start-tag. <div id="menu"><li></li> ? The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element. One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>"). 5. Error Line 76, Column 189: required attribute "alt" not specified. …"282" height="80" align="absmiddle" /></div> ? The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element. Typical values for type are type="text/css" for <style> and type="text/javascript" for <script>. Bilo bi lepo kada bi neko mogao da me uputi kako da ispravim ove greske,nadam se da sam napisala sve kako trebaMolim vas!!! |
11.2.2009, 17:22 | #2 |
Novi član
Član od: 11.2.2009.
Poruke: 24
Zahvalnice: 2
Zahvaljeno 0 puta na 0 poruka
|
Re: Ako bi neko mogao neko da mi pomogne..:))
evo jos pet gresaka:
6. Error Line 79, Column 34: there is no attribute "height". <table width="142%" height="412" border="0"> ? You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead). This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information. How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash. 7. Error Line 81, Column 32: there is no attribute "width". <th width="142" scope="row"><div align="left"><strong><spa ? You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead). This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information. How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash. 8. Error Line 81, Column 61: there is no attribute "align". …h width="142" scope="row"><div align="left"><strong><span class="style1"><a h ? You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead). This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information. How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash. 9. Error Line 113, Column 192: required attribute "alt" not specified. …163" height="328" align="absmiddle" /></div> ? The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element. Typical values for type are type="text/css" for <style> and type="text/javascript" for <script>. 10. Error Line 128, Column 184: required attribute "alt" not specified. …163" height="100" align="absmiddle" /></div> ? The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element. Typical values for type are type="text/css" for <style> and type="text/javascript" for <script>. |
11.2.2009, 17:46 | #3 |
Deo inventara foruma
Član od: 5.12.2005.
Poruke: 6.785
Zahvalnice: 348
Zahvaljeno 1.893 puta na 1.078 poruka
|
Re: Ako bi neko mogao neko da mi pomogne..:))
Problem je u tome što je upravo u objašnjenjima Validatora jako lepo objašnjeno o čemu se konkretno radi ali kako je tebi očigledno nepoznavanje engleskog jezika problem ne znam koliko je uopšte svrsishodno bilo šta komentarisati a da kasnije opet ne dođeš u situaciju da neka druga greška opet zahteva objašnjavanje.
Koliko ja mogu da vidim očigledno je da ti je problem napravio pogrešan DTD koji si definisala (pretpostavljam da si "la" a ne "o" ) na početku dokukemta. Idi na Page properties i u sekciji Title/Encoding stavi Document Type (DTD) na XHTML 1.0 Transitional |
11.2.2009, 17:49 | #4 |
Novi član
Član od: 11.2.2009.
Poruke: 24
Zahvalnice: 2
Zahvaljeno 0 puta na 0 poruka
|
Re: Ako bi neko mogao neko da mi pomogne..:))
A sajt izgleda ovako kod mene
|
11.2.2009, 18:02 | #5 |
Deo inventara foruma
Član od: 5.12.2005.
Poruke: 6.785
Zahvalnice: 348
Zahvaljeno 1.893 puta na 1.078 poruka
|
Re: Ako bi neko mogao neko da mi pomogne..:))
|
11.2.2009, 18:03 | #6 |
Banana
Član od: 9.1.2006.
Lokacija: _Cloud
Poruke: 6.106
Zahvalnice: 697
Zahvaljeno 2.628 puta na 1.354 poruka
|
Re: Ako bi neko mogao neko da mi pomogne..:))
Kad kažeš prihvatiš se posla, misliš za pare?
|
11.2.2009, 18:30 | #8 |
Novi član
Član od: 11.2.2009.
Poruke: 24
Zahvalnice: 2
Zahvaljeno 0 puta na 0 poruka
|
Re: Ako bi neko mogao neko da mi pomogne..:))
Sajt radim iz ljubavi za decka inace ne bih gubila vreme na to posto se bavim nekim dr stvarima, ali kad sam vec krenula..Kada ga gledam na monitoru rezolucije 1440x 900 sve je nekako pomereno u desno..A engleski znam dobro a html kod ne bas najbolje pa mislim da je ipak tu problem. Videcu da postavim sajt pa da mi onda kazete svoje misljenjeSaljem link uskoro!!
|
11.2.2009, 19:34 | #9 |
Banana
Član od: 9.1.2006.
Lokacija: _Cloud
Poruke: 6.106
Zahvalnice: 697
Zahvaljeno 2.628 puta na 1.354 poruka
|
Re: Ako bi neko mogao neko da mi pomogne..:))
Može jedno pitanje? Što lepo ne uradiš od nule jednostavan HTML sajt ako ti XML i CSS ne idu? Na kraju krajeva, ako ga radiš iz ljubavi, važno je da radi i odgovara bar nekim standardima... kome nije "najlepši mogući" neka plati profesionalca i tačka.
Inače, ovako na prvi pogled - nije dobro zatvoren tag za veličinu slova pa su veća od predviđenih i ispadaju sa svog mesta. Slično je i za ostale elemente. |
11.2.2009, 19:44 | #10 |
Novi član
Član od: 11.2.2009.
Poruke: 24
Zahvalnice: 2
Zahvaljeno 0 puta na 0 poruka
|
Re: Ako bi neko mogao neko da mi pomogne..:))
verovatno bi bilo previse kada bih te pitala kako to da uradim?
|
11.2.2009, 19:45 | #11 | |
détente
Član od: 3.11.2005.
Lokacija: Here be dragons...
Poruke: 5.576
Zahvalnice: 1.530
Zahvaljeno 2.470 puta na 1.488 poruka
|
Re: Ako bi neko mogao neko da mi pomogne..:))
Citat:
Neprofesionalno je prihvatiti se posla u koji se neko ne razume, pitati druge na nekom forumu da reše probleme u toku, potom potpisati taj isti sajt i nikom ništa... Rešenje je, ipak, platiti profesionalca za izradu websajta, a ne krpiti ga štapom i kanapom. |
|
11.2.2009, 19:50 | #12 |
Novi član
Član od: 11.2.2009.
Poruke: 24
Zahvalnice: 2
Zahvaljeno 0 puta na 0 poruka
|
Re: Ako bi neko mogao neko da mi pomogne..:))
Po struci sam inz farmaceutske tehnologije,ne bavim se ovim i htela sam da pomognem decku koji je otvorio ovih dana firmu,i nemam nameru da se bavim ovim..Posto to NIJE moja profesija ne vidim nista neprofesionalno u svemu ovome..
|
11.2.2009, 19:55 | #13 |
détente
Član od: 3.11.2005.
Lokacija: Here be dragons...
Poruke: 5.576
Zahvalnice: 1.530
Zahvaljeno 2.470 puta na 1.488 poruka
|
Re: Ako bi neko mogao neko da mi pomogne..:))
Neprofesionalno je upravo to - baviš se jednom strukom, a pokušavaš da se snađeš u drugoj. Hvale vredno, u redu, želiš da pomogneš dečku... ali realno - pomogla bi mu i da nađeš nekoga kome je profesija pravljenje websajtova
Ja se ne bih usudila da dečku, koji je recimo građevinar, za ljubav napravim kuću |
11.2.2009, 19:58 | #14 |
Banana
Član od: 9.1.2006.
Lokacija: _Cloud
Poruke: 6.106
Zahvalnice: 697
Zahvaljeno 2.628 puta na 1.354 poruka
|
Re: Ako bi neko mogao neko da mi pomogne..:))
|
Sledeći korisnik se zahvaljuje korisniku Eni na korisnoj poruci: | ||
iva1984 (11.2.2009) |
11.2.2009, 20:22 | #15 |
Novi član
Član od: 11.2.2009.
Poruke: 24
Zahvalnice: 2
Zahvaljeno 0 puta na 0 poruka
|
Re: Ako bi neko mogao neko da mi pomogne..:))
Aman zenska glavo,postavi se malo u moj polozaj sto coveg da placa ako mogu da pokusam da uradim to za njega besplatno,obzirom kakav imam posao ne bih u buduce imala vremena da se "snalazim" u ovoj profesiji..A poredjenje ti nije na mestu..procitaj ponovo..
|
11.2.2009, 20:33 | #16 |
détente
Član od: 3.11.2005.
Lokacija: Here be dragons...
Poruke: 5.576
Zahvalnice: 1.530
Zahvaljeno 2.470 puta na 1.488 poruka
|
Re: Ako bi neko mogao neko da mi pomogne..:))
Pokušala si, pa ne ide, zato sam i rekla da je najbolje da nađete profesionalca.
Imate veliki broj štamparskih grešaka na sajtu - fale vam YU fontovi a sam tekst se ne prikazuje dobro u zadatim parametrima. Očigledno nije podešen za pregled u drugim browserima, osim Internet Explorera. Toplo predlažem i redizajn logoa, kao i kompletnog sajta. |
11.2.2009, 20:41 | #17 |
Novi član
Član od: 11.2.2009.
Poruke: 24
Zahvalnice: 2
Zahvaljeno 0 puta na 0 poruka
|
Re: Ako bi neko mogao neko da mi pomogne..:))
Logo je licenciran,svi fransizeri u Evropi moraju da ga koristeBez obzira na lepotu
|
11.2.2009, 20:55 | #18 | |
Deo inventara foruma
Član od: 5.12.2005.
Poruke: 6.785
Zahvalnice: 348
Zahvaljeno 1.893 puta na 1.078 poruka
|
Re: Ako bi neko mogao neko da mi pomogne..:))
Citat:
Elem... Što se tiče tvog problema nije ni čudo da nemaš tu opciju... Problem je što koristiš matori MX Dreamweaver u čije vreme ako se ja još dobro sećam DTD-ovi još nisu bili preterano interesantni niti važni. Kako je standardizacija poslednjih nekoliko godina "poletela" na bolje DTD-ovi su obavezni Zato ćeš ti sada da uradiš nešto ručno u kodu.... Prva tri reda do <head> reda (taga) treba da ti izgledaju ovako: HTML kod:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> Probaj pa javi rezultate jer će to rešiti tvoje problem sa silnim greškama koje se javljaju kod tebe u Validatoru. Ako to ne pomogne ili i dalje dobiješ čudne brljotine kada povećaš rezoluciju nažalost ubola si template koji se ne prilagođava baš najbolje svim rezolucijama. Zapamti...Ako tražiš besplatan free prilagodljiv template traži "liquid design CSS" template ili na kraju krajeva pogledaj one koji su rađeni u CSS-u (većinski) pa ih postavi ovde a već će ti neko (ko je takođe za ljubav) reći da li to nešto valja da probaš njega da prepraviš |
|
Sledeći korisnik se zahvaljuje korisniku holodoc na korisnoj poruci: | ||
iva1984 (11.2.2009) |
11.2.2009, 21:14 | #19 |
Novi član
Član od: 11.2.2009.
Poruke: 24
Zahvalnice: 2
Zahvaljeno 0 puta na 0 poruka
|
Re: Ako bi neko mogao neko da mi pomogne..:))
Konacno neko da me razume Sve sam uradila kako si mi rekao,ako nista bar sve stoji na svom mestu jos uvek..Validator mi je izlistao deset novih gresaka,a tek cu da vidim kakav je sad u nekoj drugoj rezoluciji..U svakom slucaju puno hvala a ako nista ne bude od ovoga postavicu template koji nadjem pa ako budes raspolozen da mi opet odgovoris da li da petljam sta oko togaJos jednom hvala!!
|
11.2.2009, 21:19 | #20 |
Novi član
Član od: 11.2.2009.
Poruke: 24
Zahvalnice: 2
Zahvaljeno 0 puta na 0 poruka
|
Re: Ako bi neko mogao neko da mi pomogne..:))
Evo kako je kod mene izgledalo do <head> taga
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <!-- Design by Free CSS Templates http://www.freecsstemplates.org Released for free under a Creative Commons Attribution 2.5 License Name : Pluralism Description: A two-column, fixed-width template fit for 1024x768 screen resolutions. Version : 1.0 Released : 20071218 --> <html xmlns="http://www.w3.org/1999/xhtml"> Mozda tu lezi kljuc problema.. |
Bookmarks sajtovi |
|
|
Slične teme | ||||
tema | temu započeo | forum | Odgovora | Poslednja poruka |
Je l' neko čuo za Tabula Rasa? | rogehpelb | MMORPG igre | 12 | 1.3.2009 19:19 |
Barton 2600+ | dex1 | Overklok | 30 | 17.5.2006 2:06 |
Jel zna neko za metal marines? | Surovi | Stare igre | 4 | 4.4.2006 2:19 |
Da li neko zna? (AMD lista procesora) | Robert | Osnovne komponente | 10 | 7.2.2006 0:42 |