Problem sa Nero-om "buffer too large"

[dokman]

Pozdrav svima!
Hocu da narezem DVD i izbaci mi gresku "buffer too large", evo i log file

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 8.1.1.0
Internal Version: 8, 1, 1, 0

Recorder:             <PIONEER DVD-RW  DVR-110D>Version: 1.17 - HA 1 TA 0 - 8.1.1.0
 Adapter driver:      <IDE>                     HA 1
 Drive buffer  :      2000kB
 Bus Type      :      default
CD-ROM:               <PIONEER  DVD-RW  DVR-110D>Version: 1.17 - HA 1 TA 0 - 8.1.1.0
 Adapter driver:      <IDE>                     HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : MAXTOR 6L040J2          AR1.     ultra Port 0 ID 0  DMA: Off
DiskPeripheral       : WDC WD2500JB-00REA0     20.0     ultra Port 0 ID 1  DMA: Off
CdRomPeripheral      : PIONEER DVD-RW  DVR-110D1.17    viadsk Port 1 ID 0  DMA: Off
CdRomPeripheral      : ASUS    CRW-5232AS      1.01    viadsk Port 1 ID 1  DMA: Off

=== CDRom-Device-Map ===
PIONEER DVD-RW  DVR-110D   I:   CdRom0
ASUS CRW-5232AS            J:   CdRom1
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 40894464 (0) Byte
BUFE           : 0
Physical memory     : 255MB (261600kB)
Free physical memory: 108MB (111556kB)
Memory in use       : 57 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

29.8.2008
ISO compilation
12:22:23 PM    #1 Text 0 File SCSIPTICommands.cpp, Line 450
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
    
12:22:24 PM    #2 Text 0 File Isodoc.cpp, Line 6671
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate                : FALSE
    Write                   : TRUE
    Finalize CD             : TRUE
    Multisession            : FALSE
    Burning mode            : DAO
    Mode                    : 1
    ISO Level               : 1 (Max. of 11 = 8 + 3 char)
    Character set           : ISO 9660
    Joliet                  : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path  : TRUE
    Write ISO9660 ;1 file extensions        : TRUE
    
12:22:25 PM    #3 ISO9660GEN -11 File Geniso.cpp, Line 3347
    First writeable address = 0 (0x00000000)
    
12:22:25 PM    #4 Text 0 File Burncd.cpp, Line 3530
    Turn on Disc-At-Once, using DVD media
    
12:22:25 PM    #5 Text 0 File FilesystemSettingsValidator.cpp, Line 142
    FS Settings: using validator 'CUDFSettingsValidatorDVD'
    ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
    Changing UDF revision from '1.02' to '1.02'
    
12:22:26 PM    #6 Text 0 File DlgWaitCD.cpp, Line 307
    Last possible write address on media:  2298495 (510:46.45, 4489MB)
    Last address to be written:            2277903 (506:12.03, 4449MB)
    
12:22:26 PM    #7 Text 0 File DlgWaitCD.cpp, Line 319
    Write in overburning mode: NO (enabled: CD)
    
12:22:26 PM    #8 Text 0 File DlgWaitCD.cpp, Line 2972
    Recorder: PIONEER DVD-RW  DVR-110D, Media type: DVD-R
     Disc Manufacturer ID: <MCC 03> <RG20  >
     Disc Application Code: 64, Disc Physical Code: 193
    
12:22:26 PM    #9 Text 0 File DlgWaitCD.cpp, Line 493
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    
12:22:26 PM    #10 Text 0 File ThreadedTransferInterface.cpp, Line 785
    Setup items (after recorder preparation)
     0: TRM_DATA_MODE1 ()
        2 indices, index0 (150) not provided
        original disc pos #0 + 2277904 (2277904) = #2277904/506:12.4
        relocatable, disc pos for caching/writing not required/ required
        -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2277904 blocks [I: PIONEER DVD-RW  DVR-110D]
    --------------------------------------------------------------
    
12:22:26 PM    #11 Text 0 File ThreadedTransferInterface.cpp, Line 986
    Prepare [I: PIONEER DVD-RW  DVR-110D] for write in CUE-sheet-DAO
    DAO infos:
    ==========
     MCN: ""
     TOCType: 0x00; Session Closed, disc fixated
     Tracks 1 to 1:                                  Idx 0         Idx 1      Next Trk
       1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4665147392, ISRC ""
    DAO layout:
    ===========
     ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
            0 |  lead-in |   0 |    0x41 |        0 |        0 | 0x00
            0 |        1 |   0 |    0x41 |        0 |        0 | 0x00
            0 |        1 |   1 |    0x41 |  2277904 |        0 | 0x00
      2277904 | lead-out |   1 |    0x41 |        0 |        0 | 0x00

Ako neko zna u cemu je stvar zamolio bi ga za pomoc, u drugom postu je drugi deo

[dokman]

12:22:26 PM    #12 Text 0 File SCSIPTICommands.cpp, Line 240
    SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
    
12:22:26 PM    #13 Text 0 File Burncd.cpp, Line 4316
    Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
    
12:22:26 PM    #14 Phase 24 File dlgbrnst.cpp, Line 1764
    Caching of files started
    
12:22:26 PM    #15 Text 0 File Burncd.cpp, Line 4435
    Cache writing successful.
    
12:22:26 PM    #16 Phase 25 File dlgbrnst.cpp, Line 1764
    Caching of files completed
    
12:22:26 PM    #17 Phase 36 File dlgbrnst.cpp, Line 1764
    Burn process started at 4x (5,540 KB/s)
    
12:22:28 PM    #18 Text 0 File ThreadedTransferInterface.cpp, Line 2735
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
    
12:22:28 PM    #19 Text 0 File DVDR.cpp, Line 3245
    Recording mode: Sequential Recording Mode
    
12:22:28 PM    #20 Text 0 File DVDR.cpp, Line 3401
    Start write address at LBA 0
    DVD high compatibility mode: Yes
    
12:22:28 PM    #21 Text 0 File Cdrdrv.cpp, Line 10026
    ---- Disc Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
     Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
     Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
     Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
     Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
     Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
     Outer Limit of Data Recordable Area:          0 h
     Data in Burst Cutting Area (BCA) does not exist
      Revision number of maximum recording speed: 6.0
      Revision number of minimum recording speed: -
      Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - - 
      Class: 0,  Extended part version: 33
      Start PSN of the Extra Border Zone: 0 h
      Start PSN of Physical format information blocks in Extra Border Zone: 0 h
     Media Specific [16..783]:
        00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00    .`...0@P...!....
        1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        01 40 C1 FD 9E D8 52 00 - 02 85 0D 0E 88 9A 80 00    .@....R.........
        03 4D 43 43 20 30 33 00 - 04 52 47 32 30 20 20 00    .MCC.03..RG20...
        05 88 80 00 00 00 02 00 - 06 09 0B 14 87 78 90 00    .............x..
        07 88 80 00 00 00 00 00 - 08 08 13 0D 11 0C 08 00    ................
        09 95 07 0E 0B 78 88 00 - 0A A0 00 20 00 20 10 00    .....x..........
        0B 06 1A 17 86 67 85 00 - 0C 99 AB 3A 83 20 32 00    .....g.....:..2.
        0D 00 00 D0 00 00 00 00 - 0E 0A 24 35 2F 29 1A 00    ..........$5/)..
        0F 50 1B 29 17 97 B5 00 - 10 88 80 00 00 00 00 00    .P.)............
        11 00 00 00 00 00 00 00 - 12 09 2E 37 2F 29 19 00    ...........7/)..
        13 50 1B 29 17 97 B5 00 - 14 88 80 00 00 00 00 00    .P.)............
        15 00 00 00 00 00 00 00 - 16 09 3F 44 3D 24 29 00    ..........?D=$).
        17 60 1F 2F 1D 97 B5 00 - 18 88 84 00 04 00 04 00    .`./............
        19 00 00 00 00 00 00 00 - 1A 08 57 46 42 27 24 00    ..........WFB'$.
        1B 70 1F 2B 0F AA B5 00 - 1C 88 84 00 04 00 04 00    .p.+............
        1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
    
12:22:28 PM    #22 Text 0 File ThreadedTransfer.cpp, Line 268
    Pipe memory size 40868800
    
12:22:29 PM    #23 SPTI -31 File SCSIPassThrough.cpp, Line 181
    CdRom0: SCSIStatus(x00) WinError(87) NeroError(-31)
    Sense Key:  0x00 (KEY_NO_SENSE)
    Sense Code: 0x00
    Sense Qual: 0x00
    CDB Data:   0x2A 00 00 00 00 00 00 00 20 00 00 00 
    Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 
    Buffer x07b70040: Len x10000
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
    
12:22:29 PM    #24 SPTI -31 File SCSIPassThrough.cpp, Line 181
    CdRom0: SCSIStatus(x00) WinError(87) NeroError(-31)
    Sense Key:  0x00 (KEY_NO_SENSE)
    Sense Code: 0x00
    Sense Qual: 0x00
    CDB Data:   0x2A 00 00 00 00 00 00 00 20 00 00 00 
    Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 
    Buffer x07378100: Len x10000
    
12:22:29 PM    #25 Text 0 File MMC.cpp, Line 20166
    Writer-Buffer for 㩉倠佉䕎剅䐠䑖刭⁗䐠剖ㄭ〱D reduced to 32768Bytes
    
12:22:29 PM    #26 SPTI -31 File SCSIPassThrough.cpp, Line 181
    CdRom0: SCSIStatus(x00) WinError(87) NeroError(-31)
    Sense Key:  0x00 (KEY_NO_SENSE)
    Sense Code: 0x00
    Sense Qual: 0x00
    CDB Data:   0x2A 00 00 00 00 00 00 00 10 00 00 00 
    Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 
    Buffer x07378100: Len x8000
   
12:22:29 PM    #27 CDR -31 File Writer.cpp, Line 306
    Buffer too large
    I: PIONEER DVD-RW  DVR-110D
    
12:22:29 PM    #28 Text 0 File DVDR.cpp, Line 3803
    EndDAO: Last written address was -1 (FFFFFFFFh)
    
12:22:29 PM    #29 Phase 38 File dlgbrnst.cpp, Line 1764
    Burn process failed at 4x (5,540 KB/s)
    
12:22:29 PM    #30 Text 0 File SCSIPTICommands.cpp, Line 287
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
    
12:22:31 PM    #31 Text 0 File Cdrdrv.cpp, Line 11276
    DriveLocker: UnLockVolume completed
    
12:22:31 PM    #32 Text 0 File SCSIPTICommands.cpp, Line 450
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
    

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[JovanK]

Za početak reinstaliraj nera.

[Skochko]

Ako kaZe "buffer too large" ti ga onda smanji
Salu na stranu probaj sa reinstallacijom NERA kao sto @JovanK kaZe, a ako to ne pomogne nosi kod nekog ortaka pa probaj svoj reZac kod njega. Ne Znam da li se podraZumeva da ranije nisi imao ovih problema. Pa, jer jesi?

[Monk Psycho]

preporuka nadji nesto od ovoga : ImgBurn (free), express burn (nije djabe ) i Ones (placa se. po meni je najbolji posto komunicara sa firmwareom rezaca)

[dokman]

Evo ovako, 5x sam instalirao nero i burn4free, imam ASUS CD rezac koji radi normalno, pre nekog vremena sam instalirao driver za VIA chipset, neko vreme je radio normalno, pa je poceo da brljavi, pre je bilo dovoljno da iskljucim Nero ukljucim ponovo i radi, pa restart racunara i sad je zakucao skroz, uopste ne pocinje rezanje vec izbaci gresku. Posle svih zahvata sada uopste "ne vidi" ni CD ni DVD, inace na istom su kablu. Prebacim kabl na Secondary IDE channal radi normalno, ali ne moze da boot-uje sa CD-a, na Primary je hard disk.
Driver sam instalirao zbog hard diska od 250GB, nije video citav hard, izgleda zbog njega sad brljavi.
Ako je neko imao slican problem neka javi kako ga je resio!
Unapred hvala!

[macan32]

dokman kaže:

Driver sam instalirao zbog hard diska od 250GB, nije video citav hard, izgleda zbog njega sad brljavi.
Ako je neko imao slican problem neka javi kako ga je resio!
Unapred hvala!

Ranije sam imao stariji komp kome sam posle njegovog petogodisnjeg rada stavio hard od 250 GB.
Kompjuter je poceo non-stop da se restartuje. Ja nisam ubacivao novi drajver za VIA chipset, vec sam uradio update BIOS-a i tako resio problem sa hardom.
Probaj i ti tako, jer iz tvog profila se vidi da imas star kompjuter. Uradi reinstalaciju Windowsa.

Imao sam problem i sa Nero programom, ali taj problem nisam resio njegovom reinstalacijom ili instalacijom neke novije verzije Nera.
Jedino je reinstalacija Windowsa pomogla, a posle toga sam shvatio da i sam rezac nije pod libelu,
jer nekad nece da reze na vecoj brzini od 4X tj. ne mogu ni da odaberem vecu brzinu.

Rezac mi je Pioneer-ov, a ti DVD rezaci prosto primoravaju vlasnike da ih stave da budu master.
Ja sam moj rezac stavio da radi kao secundary-master i sam je na IDE grani.

Ne znam sta bih ti vise rekao osim da mislim da nemas problem sa Nerom. Mozda si do sad resio problem, ali mozda nekome i pomogne ovaj moj post.