Problemi sa SandForce SF-2281 kontrolerom

[reckless]

Sta se desava sa ovim? Planiram da uzmem agility 3 i zanima me jel problem resen ?

[Thaedass]

Thaedass kaže:

Prosirila se vest da Intel ima problema sa firmware-om za svoje SSD-ove iz 320 serije. Ceka se zvanicno obavestenje i (nadam se skorije) resenje

Ko god poseduje Intelov SSD iz 320 serije neka skine firmware sa sledeceg linka: http://downloadcenter.intel.com/Deta...&DwnldID=18363

Spoiler za Firmware update:

Status:

Intel has posted a firmware update for the Intel® SSD 320 Series (firmware 4PC10362) which addresses the Bad Context 13x Error being discussed on the Communities site and elsewhere. You can download the new firmware here:

www.intel.com/go/ssdfirmware

Also posted at this link are Read Me, Release Notes, and SSD Firmware Update Tool Guidelines which provide detailed firmware update instructions and other relevant information such as the most current firmware revision available.

What should I do if I have not experienced this issue?

In order to provide the best user experience, Intel always recommends users download and install the latest firmware. As with any storage device, Intel recommends users frequently back up their data and periodically check for firmware updates. The Intel® SSD Toolbox provides a host of utilities to monitor your SSD, including displaying detailed information such as the currently installed firmware revision.

What should I do if I have already experienced this issue?

If you have already experienced a drive failure or encounter this problem before the firmware update was released, please contact your Intel representative or Intel customer support (via web: www.intel.com or phone: www.intel.com/p/en_US/support/contact/phone) for an SSD replacement. An alternative option is to use the Intel ® SSD Toolbox or similar tools to perform a secure erase in order to restore the SSD to an operational state; all data will be erased. After secure erase, update your SSD with the new firmware. The firmware update will not recover user data.

Background:

For users unfamiliar with the issue, an Intel SSD 320 Series drive may exhibit a drive capacity of 8MB and an electronic serial # field containing a message of “BAD_CTX 0000013x” caused by an unexpected power loss under specific conditions. Once this error occurs, no data on the SSD can be accessed and the user cannot write to or read from the SSD.

[reb0rn]

reckless kaže:

Sta se desava sa ovim? Planiram da uzmem agility 3 i zanima me jel problem resen ?

Nije u potpusnosti resen...

[reckless]

^znam... imao sam freeze 5 6 puta sa najnovijim fwom.. (ne koristim ga kao sistemski)

[arki]

reckless kaže:

^znam... imao sam freeze 5 6 puta sa najnovijim fwom.. (ne koristim ga kao sistemski)

Sa kojim ssd-om
Ja sam juce fleskovao 2.11,a sa 2.09 nisam imao problema,kao sa FW 2.06.

[reckless]

agility 3 60gb

[arki]

A dali imaju drugi proizvodjaci problema sa SF-2200 kontrolerom,kao np.
Patriot Memory Wildfire Series
Corsair Force Series GT
Kingston Technology HyperX

[Picard]

SandForce Identifies Firmware Bug Causing BSOD Issue, Fix Available Today

After months of end user complaints, SandForce has finally duplicated, verified and provided a fix for the infamous BSOD/disconnect issue that affected SF-2200 based SSDs. The root cause is a bug in the firmware, although specifics are pretty slim. The typically sparse release notes just state a rare condition resulting in a blue screen error has now been addressed. OCZ has been testing the fix in-house for the past three weeks and now believes it is fit for public release. SandForce is simultaneously releasing the firmware to its partners, so if you have non-OCZ drives you should contact your drive manufacturer for an availability update.

The new firmware is version 2.15 for OCZ drives and 3.3.2 for drives that use SF's standard numbering system. It's important to note that the fix here is for the bug that SF discovered and may not solve all pending issues. Given the extremely long discovery and fix time for this issue I still believe the best policy towards SandForce drives is one of caution, at least until we start hearing from users as to whether or not this fix worked (and didn't create any new issues).

Update: OCZ sent along its official statement -
OCZ is pleased to announce that the cause of a BSOD issue experienced by some SF-2000-based drive owners has been identified by OCZ and SandForce. A new firmware update which directly addresses this BSOD occurrence related to SF-2000 based SSDs is available here. All newly manufactured OCZ SF-2000 based SSDs will feature the new 2.15 firmware revision (which is based on SandForce firmware version 3.3.2.) We highly recommend that any customers that have experienced the BSOD issue update their firmware to 2.15.

We sincerely appreciate the support from our customers, and if any customers have any questions or require additional support please do not hesitate to contact a customer service representative and we will be happy to address any questions or concerns.

Source: OCZ

http://www.anandtech.com/show/4973/s...vailable-today

Nadam se da će konačno rešiti problem, u tom slučaju SF-2281 diskovi bi stvarno bili za preporuku.