17.10.2006, 20:44 | #1 |
Član
Član od: 17.8.2006.
Poruke: 354
Zahvalnice: 87
Zahvaljeno 59 puta na 44 poruka
|
VGA BIOS Flash
Da li mi neko strucan zna objasniti kako se ovo radi ?? Poterbno mi je za grafu 7600GS jer otklanja power indikator problem ... Napominjem ako bi mogli biti sto jednostavniji u objasnjavanju ... Hvala onom koji odgovori .
|
17.10.2006, 21:34 | #2 | |
Banned
Član od: 16.9.2006.
Poruke: 131
Zahvalnice: 0
Zahvaljeno jedanput na jednoj poruci
|
Re: Flashanje BIOS-a grafe ?
Citat:
|
|
17.10.2006, 21:48 | #3 |
Član
Član od: 17.8.2006.
Poruke: 354
Zahvalnice: 87
Zahvaljeno 59 puta na 44 poruka
|
Re: Flashanje BIOS-a grafe ?
Pa pri pokretanju windowsa iskoci mi "power indikator " poruka u kojoj driver smanji default taktove karte. Proizcodjac (Club 3d) je to resio novim BIOS-em za tu kartu, ali ja ne znam kako da je flashujem ... fajl sam skinuo...
|
19.10.2006, 19:05 | #5 |
Član
Član od: 17.8.2006.
Poruke: 354
Zahvalnice: 87
Zahvaljeno 59 puta na 44 poruka
|
Re: VGA BIOS Flash
E ovako ljudi. Ovo je postupak koji ja trebam uraditi, ali mi nije bas najjasniji. Da li mi neko moze to pojednostaviti i reci u kratkim crtama sta trebam uraditi ?
Format diskette through Windows, without any system files. Run the boot98c file and insert the formatted diskette. Insert a new disk. Copy the nvflash, xxx.rom to this disk Download latest drivers from www.nvidia.com Remove the current nvidia display driver: go to; control panel / software Boot your PC with the boot98c disk. Do not use the DVI connection but the CRT if possible. Insert the disk with the nvflash program and the BIOS file on it. Type: First backup your original BIOS first: A:\nvflash –b original.rom Flash the new BIOS into your card: A:\nvflash xxx.rom Two notifications will come up, just press “Y” Your VGA will be programmed. Reboot your system and install the drivers and reboot. With any problems, for example the screen stays black after rebooting. Restore the original.rom by removing the VGA from your system and adding a PCI VGA card to your system. Set your mainboard BIOS setting on VGA through PCI as first display adapter. Switch the PC off and install the VGA next to your PCI VGA card (connect the monitor with the PCI card) and run the flash again. If the new BIOS is not working, restore the original by A:\nvflash -4 -5 -6 original.rom Regards, Club-3D |
Bookmarks sajtovi |
|
|
Slične teme | ||||
tema | temu započeo | forum | Odgovora | Poslednja poruka |
Abit NF7 | Milos Bozic | Osnovne komponente | 8 | 26.9.2006 23:33 |
beta bios? | Crusader88 | Kvarovi | 11 | 15.8.2006 1:25 |
BIOS update problem | Alexandar | Osnovne komponente | 17 | 28.6.2006 22:51 |
Bios checksum error .... | takinada | Osnovne komponente | 3 | 3.4.2006 15:20 |
BIOS pomoc!!!!! | buyjoon | Operativni sistemi | 4 | 15.1.2006 14:08 |