[bachi]

Pošto su slični...

https://openwrt.org/toh/tp-link/tl-wdr4300

NOTES

Recent (2016+) TP-Link firmware in the USA may be locked to prevent re-flashing. If you have such locked firmware, you can downgrade to use the original TP-Link firmware and flash OpenWrt from the web interface. You will need tools from dd-wrt to effect the downgrade: go to dd-wrt website and search the router database for wdr4300, then download the TL-WDR4300v1-webrevert.rar file from the router database page. Unrar the file to extract the binary. Next, from https://dd-wrt.com/site/support/other-downloads, select betas for the WDR4300, then select the most recent date (e.g.2016), then find the latest wdr4300v1. Your path is reported as something like: Downloads › betas › 2016 › 08-24-2016-r30471 › tplink_tl-wdr4300v1. Download the file factory-to-ddwrt.bin. This tool will install dd-wrt, and the revert tool will then install the original unlocked TP-Link firmware. To flash dd-wrt (dd-wrt reccomends IE/windows for this), login to the locked TP-Link router (admin/admin), and then use the “System Tool Update Firmware” to flash the factory-to-ddwrt.bin file. After the router has finished rebooting, the router has dd-wrt running at http://192.168.1.1, and you are ready to revert to the unlocked TP-Link firmware. Browse to 192.168.1.1, assign an ID/PW, then navigate to Administration → Firmware Upgrade. Select the extracted tl-wdr4300v1-webrevert.bin from your host's download directory and click the Upgrade button, dd-wrt will be replaced with the original unlocked TP-Link firmware. Now browse to http://192.168.1.1, hit reset on the router for 5+ seconds to revert the ID to admin/admin and reboot. The router is now running the old TP-Link unlocked firmware at the IP address 192.168.0.1, after the router reboots, browse to http://192.168.0.1 and login with admin/admin. To install Openwrt firmware, browse to System Tools → Firmware Upgrade and select the new firmware file of your choice (e.g.: OpenWrt Designated Driver) and click Upgrade to flash the WDR4300 with OpenWrt.
TP-Link's firmware defaults to 192.168.0.1 with username “admin” and password “admin”. After installation, OpenWrt defaults to 192.168.1.1 and no assigned password.
Precompiled images do not activate the wireless feature by default (you will have to use Ethernet for the initial configuration).
Trunk images don't have luci, you must install it manually, see luci.essentials