FIRMWARE DOWNLOAD
Skini ovo i prati uputstva...
Critical Instructions: (to be followed carefully)
1. Connect the drive as
master by it self, on the secondary IDE controller
with no other device on the same IDE cable, making note to set the jumper
on the back of the drive to the
master position.
2. Download the file GSA-H55L_1.05(EW).ZIP to a folder of your choice.
This download includes this
Read me(ew) text file, as well as the GSA-H55L_1.05.EXE program which will auto-update your drive's firmware.
3. Close all other programs including: screen saver, antivirus and/or power-down programs.
(If these programs are not closed, they will try to engage the PC,
during the update process, thus interrupting the update and damaging the drive).
4. Check the drive to ensure that there is no disk in the tray before you start
the update procedure.
5. Go into the folder with the update file and double click the GSA-H55L_1.05.EXE program
and click the
update button. Once the update is complete, you will see
Firmware Update Complete and then you will be advised to reboot the system.
You will need to reboot your PC.
The update will be complete after you reboot your system.
WARNING: Do not open any programs or start any system functions during the update,
as they will interfere with data transfer and damage the drive.
Do not cancel the operation once it has been started or the drive will
become permanently damaged, as a result.
# Model:GSA-H55L/GSA-H55N
# Ver:1.05
# Improvement Point
-. Improve detecting new kinds of medias